How To Rev Engine Without Moving In Automatic And Manual Car

How To Rev Engine Without Moving In Automatic And Manual Car

Whether you rev your car’s engine to impress your friends or just to enjoy the satisfying growl it makes, it can be an exhilarating experience. Before revving your car’s engine, especially if you’re not moving the vehicle, there are a few things you should be aware of.

Modern automobiles typically have one of two transmission types: automatic or manual. While manual transmissions require the driver to manually shift gears using a clutch pedal, automatic transmissions are more prevalent and typically easier to use. You can rev both kinds of transmissions, but it works a little bit differently for each.

The process of revving a car engine while stationary will be thoroughly examined in this article for both automatic and manual transmissions. We’ll also talk about some alternative techniques and possible risks and hazards associated with revving a car engine.

Revving an Automatic Transmission

Revving an Automatic Transmission

Put your car in neutral before starting to rev the engine if it has an automatic transmission. You’ll need to locate the gearshift lever, which is typically found on the center console between the front seats, in order to accomplish this.

Move the gearshift lever to the “N” position once you’ve found it. By doing so, you will put the car in neutral and be able to rev the engine while it is still moving.

The engine must then be revved by depressing the accelerator pedal. The accelerator pedal, which controls the car’s speed, is typically placed to the right of the brake pedal.

You can rev the engine to the desired RPM by stomping on the accelerator pedal (revolutions per minute). Avoid turning the engine over too much as this could harm it or even cause it to stall.

It’s also important to note that revving an automatic transmission can be dangerous because, if you’re not careful, it could cause the car to suddenly lurch forward. If you’re not used to revving an automatic transmission, you should proceed with caution and ask a professional for advice if you have any questions about how to do it.

Revving a Manual Transmission

Revving a Manual Transmission

Although revving an automatic transmission and a manual transmission are similar, there are some important distinctions to be aware of.

By moving the gearshift lever to the “N” position, you must first put the car in neutral. You will be able to rev the engine while the car is still.

The clutch pedal must then be used to rev the engine. The clutch pedal, which is used to disconnect the engine from the transmission, is typically placed to the left of the brake pedal.

You must depress the clutch pedal in order to rev the engine, and you must then depress the accelerator pedal to raise the engine’s RPM. To avoid harming the engine, be sure to pay attention to the engine and stop revving before it reaches its maximum RPM.

As it calls for a little more dexterity and coordination, revving a manual transmission can be trickier than revving an automatic transmission. To make sure you’re revving the engine safely and correctly if you’re new to driving a manual transmission, it’s a good idea to ask a professional or more seasoned driver for advice.

Alternative Methods

There are a few different techniques you can use if you don’t feel comfortable revving your car’s engine the conventional way or if you don’t have access to a car.

Utilizing a revving app or device is one choice. You can enjoy the rush of a revving engine without actually revving a real car thanks to these apps and gadgets that simulate the sound of an engine.

While these gadgets and apps can be entertaining, they cannot replace the real thing. An app or gadget cannot simulate the level of skill and caution needed to rev a real car engine.


While revving a car engine can be exciting and fun, it’s important to do so responsibly and safely. The process of revving the engine is fairly simple whether you have an automatic or manual transmission, but it’s crucial to follow the steps precisely to prevent harming the engine or causing any accidents.

It’s a good idea to ask a professional or more experienced driver for advice if you’ve never revved a car engine before or if you have questions about the procedure. Revving a car engine can be a thrilling and memorable experience with the proper knowledge and caution.